ADTRAN Telephone Total Access User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 264
 
Section 4 User Interface Guide Total Access 600 Series System Manual
96 © 2004 ADTRAN, Inc. 61200624L1-1B
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > CURRENT UTIL (b/s)
Current utilization of the T1 interface bandwidth presented in bits per second.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > CURRENT UTIL (%)
Current utilization of the T1 interface bandwidth presented in percentage format.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > AVERAGE UTIL (b/s)
Average utilization of the T1 interface bandwidth (since the last stats reset) presented in bits per second.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > AVERAGE UTIL (%)
Average utilization of the T1 interface bandwidth (since the last stats reset) presented in percentage format.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > FULL STATUS TX FRAMES
Number of full status frames transmitted out the WAN port.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > FULL STATUS RX FRAMES
Number of full status frames received on the WAN port
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > LINK INTEGRITY STATUS TX FRAMES
Number of Link-Integrity (LI) only frames transmitted out the WAN port.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > LINK INTEGRITY STATUS RX FRAMES
Number of LI only frames received on the WAN port.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > DROP UNKNOWN DLCI
Number of frames received that were not associated with any known PVC.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > DROP INVALID DLCI
Number of frames received that had illegal DLCIs.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PORT > CLEAR STATS
Selecting this activator will clear the port Frame Relay Statistics.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S)
View the Frame Relay status on a per PVC basis.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > DLCI
The DLCI number identifies the virtual circuit being monitored.

   Find Your Products By Category