ADTRAN Telephone Total Access User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 264
 
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 107
L2 PROTOCOL (ATM–NET–ATM) > CONFIG > PVC CONFIG > SETUP (VOICE)
Use these menus to configure the voice parameters for this logical connection from the T1 interface to the
DSX-1 of FXS port being used as a voice interface. These menus are only applicable when the
C
ONNECTION
parameter is set to V
OICE
.
L2 PROTOCOL (ATM–NET–ATM) > CONFIG > PVC CONFIG > QOS
Use these menus to configure the Quality of Service parameters for the connection. This menu does not
apply to logical connections involving a
V
OICE
port.
C
ONNECTION
(V35) > S
ETUP
> S
ETUP
> UNI DLCI
The Total Access 6XX terminates/converts an ATM circuit to a frame relay User to Network
Interface (UNI) on the V.35 interface. This DLCI must match the DLCI programmed in the
equipment connected to the V.35 interface.
C
ONNECTION
(V
OICE
) > S
ETUP
> C
ALL
C
ONTROL
The Call Control setting is used to configure the correct Voice Gateway protocol for voice
signaling control between the Total Access 6XX and the configured Gateway. The
C
ALL
C
ONTROL
setting must be configured correctly before the voice circuits will work correctly. The
Total Access 6XX supports
J
ETSTREAM
, C
OPPERCOM
, T
OLLBRIDGE
, and LES-CAS. The default is
LES-CAS.
C
ONNECTION
(V
OICE
) > S
ETUP
> LES P
ROFILE
This option applies when C
ALL
C
ONTROL
is set to LES-CAS. The choices are ITU P
ROFILE
1,
ATM F
ORUM
P
ROFILE
9, and ATM F
ORUM
P
ROFILE
10. The default is ATM F
ORUM
P
ROFILE
10.
ATM F
ORUM
P
ROFILE
9
provides ability to support 64 kbps PCM calls.
ATM F
ORUM
P
ROFILE
10
enables support of 64 kbps PCM calls as well as 32 kbps ADPCM calls.
C
ONNECTION
(V
OICE
) > S
ETUP
> LES-CAS GW S
IM
Configures the interface to simulate a LES-CAS gateway. Enable this parameter only when
back-to-back IAD testing.
C
ONNECTION
(V
OICE
) > S
ETUP
>IAD IP A
DDRESS
This option applies when C
ALL
C
ONTROL
is set to T
OLLBRIDGE
. This field is automatically
configured with the received IP address from the Tollbridge gateway. If the gateway fails to
transmit the IP address this field may be set manually.
QOS > Q
UALITY
OF
S
ERVICE
Quality of Service for ATM Undefined Bit Rate (UBR) and non-real time Variable Bit Rate
(VBR) for the data PVC DLCI. This setting depends on the type of network ATM service being
provided.

   Find Your Products By Category