0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 264
 
Section 4 User Interface Guide Total Access 600 Series System Manual
148 © 2004 ADTRAN, Inc. 61200624L1-1B
SECURITY > RADIUS SERVER
The parameters for the R
ADIUS
S
ERVER
are configured in this menu.
SECURITY > RADIUS SERVER > SERVER 1
This is the IP address of the first R
ADIUS
S
ERVER
that the unit should attempt to communicate with when
authenticating a Telnet session. Default is
0.0.0.0.
SECURITY > RADIUS SERVER > SERVER 2
This is the IP address of the second R
ADIUS
S
ERVER
that the unit should attempt to communicate with when
the primary server does not respond. Default is
0.0.0.0.
SECURITY > RADIUS SERVER > SERVER 3
This is the IP address of the third R
ADIUS
S
ERVER
that the unit should attempt to communicate with when
the primary server does not respond. Default is
0.0.0.0.
SECURITY > RADIUS SERVER > UDP PORT
This is the UDP port the unit should use when communicating with the R
ADIUS
S
ERVER
. The default is
1812, which the commonly used port.
SECURITY > RADIUS SERVER > SECRET
The R
ADIUS
S
ERVER
and unit share this text string. It is used by the R
ADIUS
S
ERVER
to authenticate the unit,
the RADIUS client. The factory default is not to use a secret.
F
ILTER
L
IST
N
AME
Selects between filters defines in the list. Default is no entry in filter list name.
N
EXT
O
PER
The next operation to use to combine with the next filter in the list (default is
E
ND
):
END
the last filter to combination.
AND
logically AND this filter with the next filter in the list.
OR
logically OR this filter with the next filter in the list.
H
IT
C
OUNT
Displays the number of packets that have matched the criteria for the defined filter.
Telnet radius is only available in A.04 firmware or later.