ADTRAN Telephone Total Access User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 264
 
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 131
ROUTER > CONFIG > DHCP SERVER > EXCLUSION RANGES
Defines any IP address (or range of addresses) that should not be used the Total Access 600 Series DHCP
server when making IP assignments to hosts on the network.
ROUTER > CONFIG > DHCP SERVER > GLOBAL SERVER OPTIONS
Configures various network parameters that apply to all hosts given an IP address from the configured
address pools (regardless of the pool). Use these commands to configure parameters for all address pools
when customizing between the address pools is not necessary. Refer to Pool Info on page 129 for more
details on the available parameters.
ROUTER > CONFIG > UDP RELAY
This menu configures the unit to act as a UDP relay agent for applications requiring a response from UDP
hosts that are not on the same network segment as their clients.
ROUTER > CONFIG > UDP RELAY > MODE
When this option is set to O
N
, the unit will act as a relay agent. Default is O
FF
.
ROUTER > CONFIG > UDP RELAY > UDP RELAY LIST
Up to four relay destination servers can be specified in this list.
N
UM
Displays the index number of the listed IP address exclusion ranges. Multiple address exclusions are
valid, and all will be listed in sequential order. This number is for reference only.
S
TART
Configures the start IP address (in dotted decimal notation) for the range of IP addresses to exclude
from the DHCP address pool. Use in conjunction with the
E
ND
field to establish a range of IP
addresses. To exclude a single IP address, enter the same address in both the
S
TART
and E
ND
fields.
END
Configures the ending IP address (in dotted decimal notation) for the range of IP addresses to
exclude from the DHCP address pool. Use in conjunction with the
S
TART
field to establish a range of
IP addresses. To exclude a single IP address, enter the same address in both the
S
TART
and E
ND
fields.
#
Indicates the entry number in the UDP Relay List table.
R
ELAY
A
DDRESS
This is the IP address of the server that will receive the relay packet. Default is 0.0.0.0.

   Find Your Products By Category