ADTRAN Telephone Total Access User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 264
 
61200624L1-1B © 2004 ADTRAN, Inc. 203
DLP-7 Updating the Firmware using TFTP
Introduction
The Total Access 6XX supports firmware updates using TFTP or XMODEM. (Use the 10/100BASET
Ethernet port and TFTP from a network server, or use XMODEM and the rear
CRAFT interfaces.) This
DLP provides the steps for a successful firmware upgrade using the
10/100BASET Ethernet port and a
TFTP server. (See DLP-8, Updating the Firmware using XMODEM, for instructions on using XMODEM.)
Tools and Materials Required
• A PC with Telnet client software
• A TFTP server accessible on the local network
A TFTP server is provided as part of the ADTRAN Utilities software suite supplied with
your shipment.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place equipment in antistatic packing material when transporting or storing.
When working on equipment, always place it on an approved antistatic mat that is
electrically grounded.

   Find Your Products By Category