ADTRAN Telephone Total Access User Manual

0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 264
 
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 63
SYSTEM CONFIG > SYSLOG > VOATM LEVEL
Minimum required level for sending Voice-over-ATM log messages. VoATM messages provide status
information concerning the FXS (or FXO for Total Access 624 units only) voice signaling occurring over
the ATM link.
SYSTEM CONFIG > SYSLOG > PPPOA LEVEL
Minimum required level for sending PPP-over-ATM log messages. PPPoA log messages provide status
information concerning PPP packets being sent and received over the ATM link.
SYSTEM CONFIG > SYSLOG > FDL LEVEL
Minimum required level for sending FDL log messages. FDL log messages provide status information
concerning the operation of the FDL link.
SYSTEM CONFIG > SYSLOG > FILTER
Minimum required level for sending Filter log messages.
SYSTEM CONFIG > NETWORK TIME
Activate the network time and configure the server type, time zone and various other network time
parameters from this menu.
SYSTEM CONFIG > NETWORK TIME > SERVER TYPE
The unit time can be entered manually from the S
YSTEM
I
NFO
menu, or the unit can receive time from an
NTP/SNTP server. The
N
ETWORK
T
IME
menu includes all parameters relating to how the unit
communicates with the time server.
The server type defines the port on which the unit will listen to receive timing information from the time
server. The choices are
NT T
IME
and SNTP. When set to NT T
IME
, the unit will receive time from an NT
server running SNTP software on its TIME port. When set to
SNTP, the unit will receive time directly
from an SNTP server. The factory default is
SNTP.
SYSTEM CONFIG > NETWORK TIME > ACTIVE
This network timing feature can be turned on and off. It determines whether the unit will request and
receive time from a time server. The factory default is
N
O
.
SYSTEM CONFIG > NETWORK TIME > TIME ZONE
All time zones are based off of Greenwich Mean Time (GMT). The choices are listed below.
•GMT
•
GMT -5 (E
ASTERN
)
•GMT -6 (C
ENTRAL
)
•GMT -7 (M
OUNTAIN
)
•GMT -8 (P
ACIFIC
)
•GMT -9 (A
LASKA
)
•GMT -10 (H
AWAII
)
The factory default is GMT-6 (C
ENTRAL
).

   Find Your Products By Category