0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 264
 
61200624L1-1B © 2004 ADTRAN, Inc. 213
DLP-11 Saving and Transferring a Current Configuration Using
XMODEM
Introduction
The Total Access 6XX supports configuration transfers from the unit via the CRAFT interface using a
VT100 terminal or terminal emulator (with XMODEM). This DLP provides the steps for a successful
configuration transfer using the
CRAFT port and XMODEM.
Tools and Materials Required
VT100 terminal or PC with VT100 terminal emulation software
XMODEM software
Appropriate cable to connect terminal to the Total Access 6XX (customer-provided).
DB-9 female to RJ-48 female adapter (ADTRAN proprietary) for connecting to the CRAFT port on the
rear of the unit (see CRAFT Port on page 31).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place equipment in antistatic packing material when transporting or storing.
When working on equipment, always place it on an approved antistatic mat that is
electrically grounded.