0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 264
 
Section 5 DLP-9 Total Access 600 Series System Manual
210 © 2004 ADTRAN, Inc. 61200624L1-1B
1. Connect to the Total Access 6XX using the 10/100BASET interface.
If you are not already connected to the unit’s 10/100BASET port using Telnet client software, use the
procedure in DLP-5, Connecting to the Unit Using Telnet, to connect to the unit.
2. Log in to the unit using the read-write password (see DLP-2, Logging in to the System, for details).
3. Verify the TFTP server is running on the network.
4. Go to the S
YSTEM
U
TILITY
menu and select the C
ONFIGURATION
T
RANSFER
menu; press <Enter>.
5. Verify the T
RANSFER
M
ETHOD
is set to TFTP.
6. Set the TFTP S
ERVER
IP A
DDRESS
to the IP address of the machine running the TFTP Server
Program.
7. Change TFTP S
ERVER
F
ILENAME
to a unique filename (for example, ta604.cfg). This will be the name
of the configuration file saved to the remote server.
Some TFTP servers constrain the format of the filename depending on the operating system of the
server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period and three extension characters).
8. Select the S
AVE
C
ONFIG
R
EMOTELY
menu field and press <Enter>. Respond with Y to confirm the
request.
9. View C
URRENT
T
RANSFER
S
TATUS
to verify the progress of the current transfer. During a successful
transfer, you will first see D
OWNLOAD
: C
OPYING
I
NTERNAL
C
ONFIG
, and then D
OWNLOAD
IN
P
ROGRESS
....
10. When the transfer process has successfully completed, I
DLE
displays in the C
URRENT
T
RANSFER
S
TATUS
field and D
OWNLOAD
C
OMPLETE
displays in the P
REVIOUS
T
RANSFER
S
TATUS
field.
Perform the steps below in the order listed.
A TFTP server ships as part of the ADTRAN Utilities. If using ADTRAN Utilities, choose
S
TART
> P
ROGRAMS
> ADTRAN U
TILITIES
> TFTP S
ERVER
to start the server.
If you are using the ADTRAN TFTP server, the IP address displays in the
S
TATUS
field. For
other TFTP servers, please refer to the appropriate documentation.
TFTP is not secure. No passwords are required for client access. Anyone can access
files through the IP port on the server machine if they know the target filename.