0

Out of 0 Ratings

Owner's of the ADTRAN Telephone Total Access gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 264
 
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 77
INTERFACES (SDSL) > STATUS
Displays the SDSL interface status information.
INTERFACES (SDSL) > STATUS > SDSL RATE
Displays the current negotiated SDSL data rate.
I
NTERFACES
(N
ETWORK
ADSL)
View the network ADSL interface status and configure ADSL parameters from this menu. These menus
are only applicable to ADSL Total Access 600 Series systems.
INTERFACES (ADSL) > CONFIG
Configure the ADSL parameters from this menu.
INTERFACES (ADSL) > CONFIG > TX ATTEN
Specifies the attenuation required for the ADSL link from 0 dB to 12 dB.
INTERFACES (ADSL) > CONFIG > RETRAIN
Forces the Total Access 6XX to retrain the ADSL link.
INTERFACES (ADSL) > STATUS
Displays the ADSL interface status information.
INTERFACES (ADSL) > STATUS > RX RATE
Displays the current receive data rate on the ADSL link.
INTERFACES (ADSL) > STATUS > TX RATE
Displays the current transmit data rate on the ADSL link.
INTERFACES (ADSL) > STATUS > RX LATENCY
Displays the current receive latency on the ADSL link.
INTERFACES (ADSL) > STATUS > TX LATENCY
Displays the current transmit latency on the ADSL link.
INTERFACES (ADSL) > STATUS > SNR (dB)
Displays the current signal to noise ratio on the ADSL link in decibels.