HTC Cell Phone HTC Touch Pro 2 Cell Phone User Manual

0

Out of 0 Ratings

Owner's of the HTC Cell Phone HTC Touch Pro 2 Cell Phone gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 146
 
20  Getting Started
Storage card
To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and 
install it into your phone.
To install a microSD card
Remove the stylus and then remove the back cover.
Locate the microSD card slot on the upper part of the 
exposed right panel.
Insert the microSD card into the slot with its gold 
contacts facing down until it clicks into place.
Note  To remove the microSD card, press it to eject it from the slot.
1.
2.
3.
RESET
Storage 
card slot
1.4 Charging the Battery
New batteries are shipped partially charged. Before you start using your phone, it is recommended that you 
install and charge the battery. Some batteries perform best after several full charge/discharge cycles.
Note  Only the AC adapter and USB sync cable provided with your phone must be used to charge the phone. Use of 
unauthorized AC adapters and USB sync cables can impact the performance of your phone. 
Connect the USB connector of the AC adapter to the sync connector on your phone, and then plug in the AC 
adapter to an electrical outlet to start charging the battery.
Charging is indicated by a solid amber light on the Notification LED. As the battery is being charged while the 
phone is on, a charging icon   also appears in the title bar of the Home screen. After the battery has been fully 
charged, a full battery icon   appears in the title bar of the Home screen.
Warning! •• Do not remove the battery from the phone while you are charging it using the AC or car adapter.
• As a safety precaution, the battery stops charging before it overheats.
1.5 Starting Up
After installing and charging the battery, you can now power on and start using your phone.
Turning your phone on and off
To turn on the phone
Press the POWER button. 
When you turn on your phone for the first time, Windows Mobile starts up and prepares your phone for first 
time use.
To turn off the phone
Press and hold the POWER button for a few seconds.
Tap Yes when prompted.
Switching to Sleep mode
Press and hold the POWER button to turn off the display temporarily and switch your phone to Sleep mode. 
Sleep mode suspends your phone to a low power state while the display is off in order to save battery power.
Your phone automatically goes into Sleep mode when you leave the phone idle after a certain period of time. 
You are still able to receive messages and calls while your phone is in Sleep mode. Your phone wakes up 
automatically when you have an incoming call. To wake up your phone manually, press the POWER button.
Note   You can set the display timeout period. For instructions, see “To change backlight and automatic Sleep mode 
settings” in Chapter 13.
1.
2.

   Find Your Products By Category