Honeywell Building Set Bluetooth Ring Scanner User Manual

0

Out of 0 Ratings

Owner's of the Honeywell Building Set Bluetooth Ring Scanner gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 244
 
4 - 25
Trigger Mode
Note: The Bluetooth Ring Scanner Module with a ring scanner is designed to be operated in Host Trigger Mode. For best
results leave the Trigger Mode default value unchanged for these devices.
Use this parameter to determine when the laser is activated and decoding begins, how long the laser remains on and what
determines the cessation of the laser scan and decode process.
Select a trigger mode by scanning the appropriate bar code. If you wish to change your selection, scan Cancel.
Trigger Mode Function
Level A trigger pull or Scan button press activates the laser and decode processing. The laser
remains on and decode processing continues until a trigger release, a valid decode or the
Laser On Time-out is reached.
Pulse A trigger pull or Scan button press activates the laser and decode processing. The laser
remains on and decode processing continues until a valid decode, or the Laser On Time-out
is reached.
Continuous The laser is always on and decoding. See Also: Time-out Between Decodes, Same Symbol
(page 4-23)
Blinking This trigger mode is used for triggerless scanning operations. Scanning range is reduced in
this mode. This mode cannot be used with scanners that support an aim mode.
Host (default) Triggering signal comes from a host command. Any actual trigger pull or Scan button press
will be interpreted by the scanner engine as a Level triggering option.
Level
Pulse
Continuous

   Find Your Products By Category