Cisco Systems Home Security System Cisco Asa 5505 10-User Bundle User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Home Security System Cisco Asa 5505 10-User Bundle gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
3-12
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
OL-18362-01
Chapter 3 Installing the Cisco ASA 5505
Rack or Wall Mounting the Cisco ASA 5505
Figure 3-10 Bottom View of the FIPS Enclosure
Step 3
Drill a hole on the wall at each mark you made for the location for the plastic anchors.
Step 4 Press the four plastic anchors into the holes.
Step 5 Screw the four screws provided in the accessory kit into the anchors, but not all the way. Allow them to
protrude about 1/8-inch (0.317 cm).
You must apply three tamper evident labels. Tamper evident labels are inclued in the FIPS kit,
Cisco-FIPS-KIT=. Clean the chassis of any grease, dirt, or oil before applying the tamper evident labels.
Alcohol-based cleaning pads are recommended for this purpose.
Step 6 Apply the first tamper evident label as shown in Figure 3-11.
Figure 3-11 Cisco ASA 5505 Tamper Evident Label Placement
1 M3 x 12 screws 3 Plastic anchors for vertical mounting (optional)
2 Plastic anchors
272365
1
1
2
2
3
2
3
2
1
1 Tamper label
Security
Services
Card Slot
1
2
Console
RESET
POWER
48
VDC
7
POWER over ETHERNET 6
543210
250576
1

   Find Your Products By Category