Cisco Systems Home Security System Cisco Asa 5505 10-User Bundle User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Home Security System Cisco Asa 5505 10-User Bundle gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
3-3
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
OL-18362-01
Chapter 3 Installing the Cisco ASA 5505
Powering on the Cisco ASA 5505
b. Console port
You can access the command line for administration using the console port on theCisco ASA 5505. To
connect to the console port and run a serial terminal emulator on a PC or workstation, perform the
following steps:
Step 1 Plug one end of the PC terminal adapter into a standard 9-pin PC serial port on your PC.
Step 2 Plug one end of the blue console cable into the PC terminal adapter.
Step 3 Plug the other end of the blue console cable into the Console port.
Step 4 Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no parity, and 1
stop bit.
Figure 3-2 Connecting to the Console Cable
Powering on the Cisco ASA 5505
To power on the Cisco ASA 5505, perform the following steps:
Step 1 Connect the power supply with the power cable.
Step 2 Connect the small, rectangular connector of the power supply cable to the power connector on the rear.
Step 3 Connect the AC power connector of the power supply input cable to an electrical outlet.
Note The Cisco ASA 5505 does not have a power switch. Completing Step 3 powers on the device.
Step 4 Check the power LED; if it is solid green, then the device is powered on.
1 RJ-45 Console port 2 RJ-45 to DB-9 console cable
153643
2
Security
Services
Card Slot
1
2
Console
RESET
power
48
VDC
7
POWER over ETHERNET
6
543210
1

   Find Your Products By Category