Cisco Systems Home Security System Cisco Asa 5505 10-User Bundle User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Home Security System Cisco Asa 5505 10-User Bundle gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
CHAPTER
3-1
Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
OL-18362-01
3
Installing the Cisco ASA 5505
Installing the Chassis
This section contains the following topics:
• Connecting the Interface Cables, page 3-1
• Powering on the Cisco ASA 5505, page 3-3
• Installing a Cable Lock, page 3-4
• Rack or Wall Mounting the Cisco ASA 5505, page 3-4
Connecting the Interface Cables
This section describes how to connect the cables to the Ethernet and Console ports.
Warning
Only trained and qualified personnel should install, replace, or service this equipment
.
Statement 49
Caution Read the safety warnings in the Regulatory Compliance and Safety Information for the Cisco ASA 5505
Adaptive Security Appliance and follow proper safety procedures when performing these steps.
To connect cables to the ports perform the following steps:
Step 1 Place the chassis on a flat, stable surface.
Step 2 Before connecting a computer or terminal to the ports, check to determine the baud rate of the serial port. The
baud rate must match the default baud rate (9600 baud) of the Console port of the adaptive security
appliance. Set up the terminal as follows: 9600 baud (default), 8 data bits, no parity, 1 stop bits, and Flow
Control (FC) = Hardware.
Step 3 Connect the cables to the ports.

   Find Your Products By Category