Honeywell Building Set Bluetooth Ring Scanner User Manual

0

Out of 0 Ratings

Owner's of the Honeywell Building Set Bluetooth Ring Scanner gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 244
 
2 - 13
5. Removing / Replacing the Ring Finger Strap Assembly
Note: Do not pull on the finger strap or the flexible liner to remove the finger strap assembly. This quick disconnect function is
designed for occasional safety hazards and is not intended for daily removal.
Using the Quick Disconnect Function, grasp the finger strap and pull the finger strap out and away from the ring scanner.
Before attaching the finger strap to the trigger module, thread the finger strap first through the hinge, then under and over the pin
next to the scan button.
It should slide easily.
Cleaning the Beam Aperture
Note: These instructions are for components made of glass. If there is a removable protective film sheet on the beam aperture,
remove the film sheet before cleaning and before first use.
Keep fingers and rough, sharp or abrasive objects away from the beam aperture.
If the aperture becomes soiled or smudged, clean only with a standard household cleaner such as Windex® without vinegar or
use Isopropyl Alcohol.
Do not use paper towels or harsh-chemical-based cleaning fluids since they may result in damage to the aperture surface. Use
a clean, damp, lint-free cloth. Do not scrub optical surfaces.
If possible, clean only those areas which are soiled. Lint/particulates can be removed with clean, filtered canned air.

   Find Your Products By Category