Garmin GPS Receiver Garmin GPS Receiver User Manual

0

Out of 0 Ratings

Owner's of the Garmin GPS Receiver Garmin GPS Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 78
 
Digital Selective Calling (DSC)
62 GPSMAP 400/500 Series Owner’s Manual


1. From the Home screen, select  >  >
.
2. Select the vessel from the list > .
3. Select .

1. From the Home screen, select  >  >
.
2. Select the vessel from the list > .
3. Select an option:
• Select  to edit the symbol.
• Select  to edit the line color.

When you connect your Garmin chartplotter to a Garmin VHF NMEA
2000-compatible radio, you can use the chartplotter interface to set up an
individual routine call. When setting up an individual routine call from your
chartplotter, you can select one of the following channels on which you want
to communicate. The radio transmits this request with your call.
The selection of a DSC channel is limited to those channels that are available
in all frequency bands: 6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77.
: The default channel is 72. However, select  to select a
different channel from the list. If you select a different channel, the chartplotter
uses that channel for subsequent calls until you call using a different channel.

1. While viewing a chart, press  >  >  >
.
2. Select the station to call from the list.
3. Select  > .
4. Select  to send the information about the call to the radio.
5. On your Garmin VHF radio, select .

When you connect your Garmin chartplotter to a Garmin VHF NMEA
2000-compatible radio, you can use the chartplotter interface to set up an
individual routine call to an AIS target. For more information on selecting a
channel other than the default channel (Channel 72), see (page 62).

1. While viewing a chart, use the  to select an AIS target .
2. Select  > .
3. Select  to send the information about the call to the radio.
4. On your Garmin VHF radio, select .

   Find Your Products By Category