Garmin GPS Receiver Garmin GPS Receiver User Manual

0

Out of 0 Ratings

Owner's of the Garmin GPS Receiver Garmin GPS Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 78
 
Viewing Information
GPSMAP 400/500 Series Owner’s Manual 37

The Celestial screen shows information about sunrise, sunset, moonrise,
moonset, the moon phase, and the approximate sky view location of the sun
and moon. By default, the chartplotter shows celestial information for the
present date and time.
From the Home screen, select  > .
➊
➋
➍
➎
➌
➊
Overhead
➋
Sun Position
➌
Moon phase
➍
Moon position
➎
Horizon

You can select a date and time for which to view celestial information, and you
can view the moon phase for the selected date and time.
1. From the Home screen, select  >  > .
2. Change the date to view celestial information for a different date.

To view user data, from the Home screen, select  > .
—view a list of all saved waypoints (page 24).
—view a list of saved routes (page 26).
—view a list of saved tracks (page 27).
—transfer waypoints, routes, and tracks to and from an SD card
or a network.
—erase all user waypoints, routes, and tracks.

1. With the chartplotter off, insert an SD card into your chartplotter, then
power it on to allow it to place a le on the SD card. This le provides
information to MapSource to format the data. This only needs to be done
the rst time you copy or merge MapSource data to your chartplotter from
a specic SD card.
2. Check your MapSource version on the computer by clicking  > 
. If the version is older than 6.12.2, update to the most-current
version by clicking  >  , or check the
Garmin Web site at www.garmin.com.
3. Insert the SD card into an SD card reader that is attached to the computer.
4. From within MapSource, click  > .
5. From the Send to Device window, select the drive for the SD card reader
and the types of data you want to copy to your chartplotter.
6. Click .
7. Insert the SD card into the SD card slot on the front of the unit.

   Find Your Products By Category