Garmin GPS Receiver Garmin GPS Receiver User Manual

0

Out of 0 Ratings

Owner's of the Garmin GPS Receiver Garmin GPS Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 78
 
Viewing Information
32 GPSMAP 400/500 Series Owner’s Manual

1. From the Home screen, select  > > .
2. Select the left and right arrows on the  to move from one gauge
screen to the next.

To establish the upper and lower limits of a gauge and the range of desired
standard operation, you can congure up to four values for the engine gauge.
When a value exceeds the range of standard operation, the gauge face or bar
becomes red.
 
Scale
minimum
This value is less than the rated minimum, and it represents
the lower limit of the gauge� This setting is not available on all
gauges�
Scale
maximum
This value is greater than the rated maximum, and it
represents the upper limit of the gauge� This setting is not
available on all gauges�
Rated
minimum
Represents the minimum value of the standard operating
range�
Rated
maximum
Represents the maximum value of the standard operating
range�
1. From the Home screen, select  > >  >
 >  > .
2. Select a gauge.
3. Select  > .
4. Select the gauge limit you want to set (, , ,
or ).
 Some of these options may not be available for all gauges.
5. Select the gauge limit.
6. Repeat steps 4 and 5 to set additional gauge limits.

If you have activated gauge status alarms, when the engine sends a warning
status message over the NMEA 2000 network, a gauge status alarm message
appears. The gauge face or bar may become red depending on the alarm type.
From the Home screen, select  > >  >
 >  >  >.

1. From the Home screen, select  > >  >
 >  >  >.
2. Select one or more engine gauge alarms that you want to turn on or off.
3. Select .

The engine gauges can show information for up to four engines.
1. From the Home screen, select  > >  >
 >  >  > .
2. Select the number of engines.
3. Select .
To select the engines for which information appears in the gauges, select 
 and complete steps 2 through 5 of “Selecting the Engines Shown in
Gauges” (following section).

   Find Your Products By Category