0

Out of 0 Ratings

Owner's of the Garmin GPS Receiver Garmin 18X GPS Receiver Module gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 38
 
190-00879-08 GPS 18x Technical Specifications Rev. D
Page 33
Menus
File Menu
The File Menu allows you to open, save, and print sensor configurations. The items in the File Menu work like most
Windows-based programs.
Comm Menu
The Comm (Communication) Menu allows you to set the port number and baud rate, as well as connect to the sensor
and disconnect from the sensor.
Setup: Opens the Comm Setup window. Select the serial port to which the
sensor is connected from the drop-down list. Select Auto (the program
determines the baud rate on its own) or Manual (you enter the baud rate) for
the baud rate entry.
Connect: Select Connect to connect to the sensor in order to change or
view the configuration.
Disconnect: Select Disconnect to disconnect from the sensor.
Config Menu
The Config (Configuration) Menu allows you
to configure the sensor as it is connected.
Sensor Configuration (F6): Opens the
Sensor Configuration window, shown to the
right. Many of the fields in this window
should not be changed. Refer to the beginning
of this manual for information on many of
these fields. This window is used to enter a
new latitude, longitude, and altitude for the
sensor. This is especially helpful when you
are programming the sensor for use in a
particular geographic location.
Click Reset Unit to perform a reset on the
unit, much like cycling the power.
Resetting the non-volatile memory (Reset
NonVol) clears all of the data from the non-
volatile memory.
NMEA Sentence Selections (F7): Displays the NMEA Sentence Selections
window. If the sentence is enabled, a check mark appears in the box to the left of
the sentence name. Click the box to enable or disable to the sentence.