Garmin GPS Receiver Garmin 18X GPS Receiver Module User Manual

0

Out of 0 Ratings

Owner's of the Garmin GPS Receiver Garmin 18X GPS Receiver Module gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 38
 
190-00879-08 GPS 18x Technical Specifications Rev. D
Page 32
The Garmin Sensor Configuration Software (SNSRCFG.exe) configures the GPS sensors based on user-selected
parameters. Some application features include the ability to download GPS sensor configuration, maintain different
configurations in files, and perform GPS sensor configurations quickly with the use of one function key.
APPENDIX E: SENSOR CONFIGURATION SOFTWARE
This section provides a brief overview of the Sensor Configuration Software. Refer to this section when using the
software to configure your Garmin sensor.
Downloading the Sensor Configuration Software
SNSRCFG.exe is available from the Garmin Web site. To download the
software, go to www.garmin.com/oem. Click GPS 18x 5Hz or GPS 18x OEM
(for the GPS 18x USB, 18x PC, and 18x LVC), and click Updates &
Downloads. SNSRCFG.exe is included in the software update download.
Selecting a Model
Double-click SNSRCFG.exe. The Set Base Model to… window appears.
Select the radio button next to the type of Garmin sensor you are configuring.
Connecting to the Sensor
After selecting the type of sensor, the following window opens. This is the
Main Interface Screen for the program.
To configure your sensor, you must first
connect to the sensor.
1. Select Config > Switch to NMEA
Mode (or press the F10 key).
2. Select Comm > Setup to open the
Comm Setup window.
3. Select the serial port to which the sensor
is connected. Select Auto to have the
program automatically determine the
baud rate, or select Manual to manually
select the baud rate of the GPS 18x.
Click OK.
4. Click the Connect icon
, or select
Comm > Connect.
5. To view the current programming of the
sensor, select Config > Get
Configuration from GPS (or press the
F8 key). The current programming of the
sensor appears as shown in the example
to the right.

   Find Your Products By Category