3Com Switch 5500-EI User Manual

0

Out of 0 Ratings

Owner's of the 3Com Switch 5500-EI gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 152
 
92 CHAPTER 6: UPGRADING SOFTWARE
The number 1.04 will match the version number in the bootrom file,
which is 01_04. If the version number of the file matches the displayed
version, there is no need to download the bootrom (.btm) file.
File Distribution
The following commands enable you to distribute your downloaded files
to the remaining switches in the fabric:
1 To copy the new software file to each switch in the fabric, enter the
following from User View:
copy unit1>flash:/s4a03_01_04s56.app unit2>flash:/
Replace unit2 with unit3 and so on for each switch in the fabric.
2 To copy the new default configuration file to each switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.def unit2>flash:/
Replace unit2 with unit3 and so on for each switch in the fabric.
3 To copy the new Web user interface file to each switch in the fabric,
enter:
copy unit1>flash:/s4e01_04.web unit2>flash:/
Replace unit2 with unit3 and so on for each switch in the fabric.
4 To copy the new Bootrom firmware file to each switch in the fabric, enter:
copy unit1>flash:/s4e01_04.btm unit2>flash:/
Replace unit2 with unit3 and so on for each switch in the fabric.
Command Line Interface Switch Setup
1 To set the switch to boot from the new software you have downloaded,
enter the following:
boot boot-loader unit1>flash:/s4a03_01_04s56.app
To set the remaining switches in the fabric to boot from the new
software, replace unit1 with unit2 and so on for each switch in the
fabric.
2 To set the switch to load the new bootrom firmware, enter:
boot bootrom unit1>flash:/s4e01_04.btm
10014925-AD_S5500_GSG.book Page 92 Thursday, August 16, 2007 12:29 PM

   Find Your Products By Category