3Com Switch 5500-EI User Manual

0

Out of 0 Ratings

Owner's of the 3Com Switch 5500-EI gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 152
 
58 CHAPTER 3: SETTING UP FOR MANAGEMENT
Setting Up Your
Switch
This section provides an overview how to set up your switch and manage
that switch when it is in its default state.
Figure 25 summarizes the setup
process. Detailed steps are provided in the sections that follow. In brief,
you need to:
■ Manually configure the IP information for your switch or view the
automatically configured IP information.
■ Prepare for your chosen method of management
Figure 25 Initial Switch Setup and Management Process
Plug and Play Setup
Initial IP Information Setup
Feature Management
Power Up the Switch.
IP Information is automatically configured via
DHCP
See page 59
Do you want to manually
configure the IP information?
Connect to the con-
sole port and use the
Command Line Inter-
face.
See page 61
How do you want to manage your Switch? See page 56
SNMP
See page 72
Command Line Interface
Connect using the
console port.
See page 69
Web Interface
Connect over the
network using Telnet.
See page 69
Connect over the
network.
See page 72
How do you want to view the automatically
configured IP information?
How do you want to connect to the Switch?
Connect to a front panel port
and use the Web Interface or
Command Line
Interface.
See page 61
Use 3Com Network
Director (3ND).
See page 67
Connect to the console
port and use the
Command Line
Interface.
See page 67
Yes
No
10014925-AD_S5500_GSG.book Page 58 Thursday, August 16, 2007 12:29 PM

   Find Your Products By Category