0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera Axis Communications Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 63
 
AXIS Q1604 Network Camera
Recordings
Recordings
The Axis product can be congured to record video continuously or according to an action rule:
To start a continuous recording, see page 39.
To set up action rules, see page 36.
To access recordings, see Recording List, on page 39.
To congure camera controlled storage, see Storage, on page 49.
Recording List
Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the
event that triggered the recording.
To play or download a recording, follow these steps:
1. Go to Recordings > List.
2. Use the lter to narrow the list of recordings. Enter the desired lter criteria and click Filter. Some lters may take
a long time to complete.
3. Select the recording.
4. Click Play to play the recording, or click Download to download the recording.
Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded le is a zip le
containing a minimum of three les, of which the Matroska (mkv) les are the actual recordings. The recordings are time-stamped
with the date and time they were downloaded (that is, not the date the recordings were made).
Note
To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter
can be downloaded from www.axis.com/techsup/software
For detailed recording and video information, select a recording and click Properties.
To remove a recording, select the recording and click Remove.
Continuous Recording
The Axis product can be congured to continuously save video to a storage device. See Storage, on page 49 for more information
about storage devices. To prevent the disk from becoming full, it is recommended to congure the disk to automatically remove old
recordings. If a new stream prole is selected while a recording is ongoing, the recording will be stopped and saved in the recording
list and a new recording with the new stream prole will start. All previous continuous recordings will remain in the recording list
until they are removed manually or through automatic removal of old recordings.
To start a continuous recording, follow these steps:
1. Go to Recordings > Continuous.
2. Select Enabled.
3. Select type of storage device from the Disk list.
4. Select a Stream prole to use for continuous recordings.
5. Click Save to save and start the recording.
39