0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera Axis Communications Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 63
 
AXIS Q1604 Network Camera
Setting Up the Product
Focus Assistant
Note
The view in front of the camera should not be changed during focus adjustment (steps 5 and 6). If the camera is moved, or if
a nger or other object is placed in front of the lens, steps 3 - 7 will have to be repeated.
If movements in front of the camera cannot be avoided, the Focus Assistant should not be used.
If the camera is mounted so that the Function button cannot be accessed, you can still use the Focus Assistant. Follow the
instructions above but mount the camera after step 4, pressing the Function button instead and skip step 7.
To focus your network camera using the Focus Assistant, follow steps 1 - 3 on page 17 before you start with the steps below.
See Hardware Overview, on page 6 .
1. Mount or place the camera so that it cannot be moved.
2. Loosen the zoom puller by turning it counter-clockwise. Move the puller to set the zoom level. Re-tighten the zoom puller.
3. Set the camera to its extreme distant-focus position by loosening the focus puller and turning the lens fully clockwise.
4. Press and quickly release the Function button. When the Status LED ashes green, the Focus Assistant is enabled.
If the Status LED ashes either red or amber before you are able to adjust the lens, skip to step 7 to exit the Focus Assistant
and repeat steps 3 - 7. See the notes above. See Status LED Behavior for FocusAssistant, on page 9 .
5. Gently turn the lens counter-clockwise until it stops.
6. Turn the lens slowly clockwise until the status indicator ashes green or amber (not red).
7. Retighten the focus puller.
8. Open the Live View page in the web browser and check the quality of the image.
9. Continue with steps 6 - 8 on page 17.
18