Hitachi Camcorder DZBX35A User Manual

1.4

Out of 1 Ratings

Owner's of the Hitachi Camcorder DZBX35A gave it a score of 1.4 out of 5. Here's how the scores stacked up:

  • Reliability

    1.0 out of 5

  • Durability

    1.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    1.0 out of 5

  • Ease of Use

    1.0 out of 5
of 166
 
English
51
1<>2/3
Zooming
If you continue to hold the zoom lever on the
“T” control side with Dig. Zoom specified, the
digital zoom will be activated midway (when
optical 10-power is exceeded on DZ-GX3300A/
GX3200A, or optical 15-power is exceeded on
DZ-GX3100A or optical 25-power is exceeded on
DZ-BX35A).
You can zoom up to 500-power on DZ-
GX3300A/GX3200A; up to 800-power on DZ-
GX3100A; up to 1,200-power on DZ-BX35A.
1 Press the MENU button, choose “Dig. Zoom”
on the “Camera Functions Setup” menu
screen, and then press the A button.
2 Choose the desired magnification, and then
press the A button.
3 Press the MENU button to end the setting.
Moving the zoom lever will display the
digital zoom bar.
Note:
• The digital zoom setting will be stored in memory
even if the DVD video camera/recorder is turned off.
• You can also use the DIGITAL ZOOM button on
remote control to switch the digital zoom setting:
Pressing the button during movie recording will switch
the setting between “Off”, “40×”*
1
, and “500×”*
2
:
Pressing the button during photo recording will switch
between “Off” and “40×”*
1
.
• If you set zoom to “500×”*
2
when recording photo, the
digital zoom will be up to 40×*
1
.
• When a subject is zoomed, it may be momentarily out
of focus.
• When digital zoom is engaged, the image quality will
be rougher.
MACRO RECORDING
Use the macro function when recording a small object from close-up position: You can shoot the
subject as close as approximately 13/16” (2 cm) from the lens surface, magnifying the image to fill
the screen.
1 Aim the DVD video camera/recorder at the
subject, and press the zoom lever to “W”
control side.
Note:
• Zoom can be used, but the subject may not be
focused, depending on the distance to the subject. In
this case, move the zoom to “W” control side to focus.
• The amount of light tends to be insufficient during
macro recording: If the subject image is too dark, use
additional lighting.
W: recording wide area
(wide-angle)
T: recording enlarged
image (telephoto)
*1 “60x” on DZ-GX3100A; “100x” on DZ-BX35A.
*2 “800x” on DZ-GX3100A; “1,200x” on DZ-BX35A.

   Find Your Products By Category