Hitachi Camcorder DZBX35A User Manual

1.4

Out of 1 Ratings

Owner's of the Hitachi Camcorder DZBX35A gave it a score of 1.4 out of 5. Here's how the scores stacked up:

  • Reliability

    1.0 out of 5

  • Durability

    1.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    1.0 out of 5

  • Ease of Use

    1.0 out of 5
of 166
 
English
138
*1
• This message may also appear when dirt adheres to disc. If this message appears when a recorded
disc is recognized immediately after it is inserted, do not repair the disc; remove it and then use
the provided disc cleaning cloth to clean off the dirt before using it.
• This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
Scenes over limit.
Cannot add scenes.
The number of scenes entered in play list has reached the limit
that can be entered.
Delete several scenes.
92, 96
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
92, 96
Stop processing The C button was pressed to stop processing of multiple scenes. —
There was no scene
which can be deleted.
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
79, 86
The disc is finalized.
Finalize is not required.
This message will appear if you press the FINALIZE button with a
finalized DVD-RW/DVD-R/+RW loaded in this DVD video camera/
recorder. Finalizing the disc is not necessary.
102
This disc cannot be
used. Please replace
disc.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc. 25
This disc is recorded by
the PAL system. Please
replace disc.
This DVD video camera/recorder can use only discs recorded on
the NTSC system. A disc recorded on the PAL system cannot be
used on this DVD video camera/recorder.
—
UNFORMAT DISC The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/
recorder may be necessary (initializing will erase all recorded
contents on disc). If this message appears, try to initialize the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
99
See *2 on page 139. 10
Use AC adapter/
charger.
Finalization is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/charger for
finalization.
26, 102
Use AC adapter/
charger.
Turn off power.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
26
Write protected.
Check card.
A card with the erase prevention switch locked is inserted: Unlock
the switch.
25
Write protected.
Check disc.
• A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
100
Message Cause & Troubleshooting
Reference
page

   Find Your Products By Category