Axis Communications Security Camera 241Q User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 241Q gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 75
 
43
AXIS 241Q/241S - System options
Link-Local IPv4 Address
This is enabled by default and assigns the AXIS 241Q/241S an additional IP address for use
with UPnP™. AXIS 241Q/241S can have both a Link-Local IP and a static or
DHCP-supplied IP address at the same time - these will not affect each other.
HTTP
The default HTTP port number (80) can be changed to
any port within the range
1024-65535. This is useful for simple port mapping, for example.
HTTPS
The default HTTPS port number (443) can be changed to any port
within the range
1024-65535. This is useful for simple port mapping among other things.
NAT traversal (port mapping) for IPv4
Use NAT traversal when your video server is located on
an intranet and you want to make
it available from the other side of a NAT router.
FTP
The FTP server running in the Axis video server
enables the upload of new firmware, and
user applications. Check the box to enable the service.
RTSP
The RTSP protocol allows a connecting client to
start an MPEG-4 stream. Check the box to
enable the RTSP server and enter the RTSP port number to use. The default setting is 554,
and the allowed port range is 1024-65535. Note that MPEG-4 streams will not be available
if this is not enabled.
Network Traffic
Connection type - the default setting is Auto-n
egotiate which means that the correct speed
is automatically selected. If necessary, you can set the connection speed by selecting it
from the drop-down list.
Maximum bandwidth - Specify, in Mbit/s or kbit/s, the maximum bandwidth that
the video
server is allowed to use on your network. This is a useful function when connecting your
video server to busy or heavily loaded networks. The default setting is Unlimited.
Note:
When using MPEG-4 as the video format, remember that setting a maximum bandwidth value here may
create problems for individual video streams if the maximum value is less than the sum of the bit rates set
for the video streams.
For more information, please see the online help .
SOCKS
SOCKS is a networking proxy protocol. The Axis video server can be configured to use a
SOCKS server to reach networks on the other side of a firewall/proxy server. This
functionality is useful if the video server is located on a local network behind a firewall,
but notifications, uploads, alarms, and such need to be sent to a destination outside the
local network (such as the Internet).

   Find Your Products By Category