Axis Communications Security Camera 241Q User Manual

0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 241Q gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 75
 
38
AXIS 241Q/241S - System options
System options
Security
Users
User access control is enabled by default, when the administrator sets the root password on
first a
ccess. New users are authorized with user names and passwords, or the administrator
can choose to allow anonymous viewer login to the Live View page as described below:
User list
- the user list displays the authorized users and access levels:
HTTP/RTSP Password Settings
- Select the type of password to allow. You may need to
allow unencrypted passwords if there are viewing clients that do not support encryption,
or if you recently upgraded the firmware and the existing clients do support encryption
but need to log in again and be configured, to use this functionality.
User settings
- check the corresponding checkboxes to enable:
• Anonymous viewer login - allows
any viewer direct access to the Live View page.
• Anonymous PTZ control login - allow
s any viewer access to the Pan Tilt Zoom
controls on the Live View page (if Pan/Tilt/Zoom is available).
If the available bandwidth is limited, you may
want to limit the maximum number of
simultaneous viewers. Note that a multicast viewer is counted as one user.
IP Address Filter
Check
the Enable IP address filtering box to enable the IP address filtering function. Up to
256 IP address entries may be specified (a single entry can contain multiple IP addresses).
Click the Add... button to add new filtered addresses.
When the IP address filter is enabled, addresses
added to the list are set as allowed or
denied addresses. All other IP addresses not in this list will then be allowed or denied
access accordingly; that is, if the addresses in the list are allowed, then all others are
denied access, and vice versa. See also the online help for more information.
Note that users from IP addresses that
will be allowed must also be registered with the
appropriate access rights (User, Operator or Administrator). This is done from Setup >
System Options > Security > Users.
Referrals -
to prevent unauthorized sources from including the video stream from the
AXIS 241Q/241S into external Web pages, check the Referrals box and enter the IP address
or host name of the computer that hosts the Web pages with the included video stream.
Multiple IP addresses/host names can be defined and are separated by semicolons (;).
Viewer Provides the lowest level of access, which only allows user access to the Live View page
Operator An Operator can view the Live View page, create and modify
event types, and adjust certain other
settings. The Operator does not have access to the Systems Options configuration pages.
Administrator An administrator has unrestricted access
to the Setup Tools and can determine the registration of all
other users.

   Find Your Products By Category