0

Out of 0 Ratings

Owner's of the AT&T Cordless Telephone AT&T Cordless Handset gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 72
 
50
Appendix
Troubleshooting
My calls cut in and out while I’m using my cordless handset.
Other electronic products such as HAM radios and other DECT
phones can cause interference to your cordless telephone. Try
installing your telephone as far away as possible from these
types of electronic devices.
Do not install this phone near a microwave oven or on
the same electrical outlet. You may experience decreased
performance while the microwave oven is operating.
If you plug your phone in with a modem or surge protector,
plug the phone (or modem/surge protector) into a different
location. If this doesn’t solve the problem, relocate your phone
or modem farther apart from one another, or use a different
surge protector.
Relocate your deskset to a higher location. The phone may
have better reception when installed in a high area.
Disconnect the console from the telephone wall jack and plug
in a working telephone. If the other phones in your home are
having the same problem, the problem is in your wiring or
telephone service. Contact your telephone service provider
(charges may apply).
Excessive background noise will cause a speakerphone to fade
in and out. Try controlling the background noise by turning off
any audio devices near the speakerphone. Also, try to avoid
interrupting the person at the other end of the conversation
while they are speaking. If background noise cannot be
controlled, you should stop speakerphone operation and
return to normal handset mode.
When using a speakerphone, controlling background noise in
your environment is essential. While you are listening to your
party, press MUTE/DELETE to temporarily turn your microphone
off. When it is your turn to speak, remember to press
MUTE/DELETE to turn the microphone on.