AT&T Cordless Telephone DECT 6.0 User Manual

4.1

Out of 15 Ratings

Owner's of the AT&T Cordless Telephone DECT 6.0 gave it a score of 4.1 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.36 out of 5

  • Maintenance

    4.13 out of 5

  • Performance

    4.13 out of 5

  • Ease of Use

    3.8 out of 5
of 31
 
20
Eliminate any background noise. Noise from a television, radio or other appliances
may cause the telephone not to dial out properly. If you cannot eliminate the
background noise, first try muting the cordless handset before dialing, or dialing from
another room with less background noise.
If other telephones in your home are having the same problem, the problem is in
your wiring or telephone service. Contact your telephone service provider (charges
may apply).
My cordless handset isn’t performing normally.
Make sure the power cord is securely plugged into the telephone base. Plug the power
adapter into a different, working electrical outlet not controlled by a wall switch.
Move the cordless handset closer to the telephone base. You might have moved out
of range.
Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then
plug it back in. Allow up to one minute for the cordless handset and telephone base
to reset.
Other electronic products such as HAM radios and other DECT phones can cause
interference to your cordless telephone. Try installing your telephone as far away as
possible from these types of electronic devices.
OUT OF RANGE OR NO PWR AT BASE
appears on my cordless handset.
Ensure that the telephone base is powered on.
Place the cordless handset in the telephone base for one minute to allow the
cordless handset and base to synchronize.
Move the cordless handset closer to the telephone base. You might have moved out
of range.
Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then
plug it back in. Allow up to one minute for the cordless handset and telephone base
to reset.
Other electronic products such as HAM radios and other DECT phones can cause
interference to your cordless telephone. Try installing your telephone as far away as
possible from these types of electronic devices.
The batteries do not hold a charge.
If the cordless handset is in the telephone base or charger and the charge light does not
come on, refer to the item The charge light is off on page 21.
Charge the battery in the cordless handset for at least 10 hours. For optimum daily
performance, return the cordless handset to the telephone base or charger when not
in use.
If the battery is depleted, it may take approximately 30 minutes to charge the handset
before it shows LOW BATTERY. Refer to Battery charging on page 5 for details.
You may need to purchase a new battery. Please refer to Battery installation on page 4.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

   Find Your Products By Category