APC Battery Charger Back UPS User Manual

0

Out of 0 Ratings

Owner's of the APC Battery Charger Back UPS gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 8
 
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2009 American Power Conversion. All rights reserved. All APC trademarks are property of American Power
Conversion. Other trademarks are property of their respective owners.
990-3583
06/2009
Specifications
APC Worldwide Customer Support
General
Topology Line-Interactive
Input
Rated input voltage 120 Vac
Phase Single phase 2+ ground
Frequency 50/60 Hz (autosensing)
Input voltage range
(on AVR operation)
Default setting: 88 V-141 V
Lower Limit Voltage Range: 78 V- 144 V
Upper Limit Voltage Range: 88 V- 137 V
Power cable length 6 ft
Input plug type NEMA5-15
Output
Output plug type NEMA5-15R
Output outlet Back-up outlets (3)
Surge outlets (3)
Maximum load 700 VA/420 W
Output voltage 115 Vac +
8%
Frequency 50/60 Hz +
1
On-battery waveform Stepped sine wave
Transfer time Maximum 8 ms
Surge Protection/Noise
Surge protection Yes
Noise filter Yes
Data line protection ADSL, ISDN, 10/100Base-T
Interface
Interface USB v1.1
Technical Support http://www.apc.com/support
Internet http://www.apc.com
Worldwide +1.401.789.5735
Service
If the Back-UPS arrived damaged, notify the carrier.
If the Back-UPS requires service, do not return it to the dealer.
1.Consult the Troubleshooting section to eliminate common
problems.
2.If the problem persists, go to http://www.apc.com/support/.
3.If the problem still persists, contact APC Technical Support.
Have the Back-UPS model number, serial number and date of
purchase available. Be prepared to troubleshoot the problem
with an APC Technical Support representative. If this is not
successful, APC will issue a Return Merchandise Authoriza-
tion (RMA) number and a shipping address.
Warranty
The standard warranty is three (3) years from the date of pur-
chase. APC’s standard procedure is to replace the original unit
with a factory reconditioned unit. Customers who must have the
original unit back due to the assignment of asset tags and set de-
preciation schedules must declare such a need at first contact
with an APC Technical Support representative. APC will ship
the replacement unit once the defective unit has been received
by the repair department, or cross-ship upon the receipt of a val-
id credit card number. The customer pays for shipping the unit
to APC. APC pays ground freight transportation costs to ship
the replacement unit to the customer.

   Find Your Products By Category