3M Computer Monitor MicroTouch User Manual

0

Out of 0 Ratings

Owner's of the 3M Computer Monitor MicroTouch gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 33
 
Chapter 2 Setting Up Your M150 FPD Monitor 13
Figure 1 Disassembling the Yoke & Base for Arm Mounting
Step 3 -- Remove the inner four screws holding the base to
the FPD and gently remove the base.
Step 2 -- Remove the bottom two screws holding the hinge
cover in place. Remove the small hinge cover.
Step 1 -- Unlock the yoke. With the unit laying face down
safely and securely on a nonabrasive surface, remove the
two screws connecting the top of the yoke. Lift yoke and pull
down to disengage tabs to remove.
Countertop Base Mounting Option
Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or
countertop. Use standard screws in the desktop or countertop and then slide the base plate
on for a secure fit.
Note: A full size template has been included in the back of this manual for your convenience.
Simply tear out the template and drill directly through the holes indicated to secure your monitor
to any surface.
Figure 2 Keyhole Mounting Slots
96 mm
33.25 mm
17.75 mm
10 mm
5.5 mm
55.45 mm
48 mm
3M Touch Systems Proprietary Information

   Find Your Products By Category