0

Out of 0 Ratings

Owner's of the Axis Communications Security Camera 241Q gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 75
 
34
AXIS 241Q/241S - Pan Tilt Zoom
PTZ configuration
Once PTZ has been installed for the AXIS 241Q/241S PTZ Configuration now appears in the
menu to the left.
Preset positions
A preset position is a pre-defined camera view than
can be used to quickly move the
camera to a specific location.
From P
reset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera
to the required position. When satisfied with the camera's position, enter a descriptive
name. The camera position, iris and focus settings are then saved as a preset position.
The position can be assumed at any
time, by selecting the preset's name from the Preset
positions drop-down list. Preset positions can be selected in Live View, from events and in
Sequence mode.
One position can be set as the Home position, whi
ch is readily accessible by clicking in the
box beside Use current position as Home. The position's name will then have (H) added to
the end, e.g. Office Entrance (H).
PTZ controls
If the AXIS 241Q/241S has been appropriately configured, the Live View page displays the
controls available for the installed Pan Tilt Zoom (PTZ) device. The administrator can
enable/disable the controls for specified users.