JVC Camcorder GZ-MG330 User Manual

3.6

Out of 3 Ratings

Owner's of the JVC Camcorder GZ-MG330 gave it a score of 3.6 out of 5. Here's how the scores stacked up:

  • Reliability

    3.33 out of 5

  • Durability

    3.33 out of 5

  • Maintenance

    3.67 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    3.67 out of 5
of 42
 
33
ENGLISH
FURTHER INFORMATION
The camera is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly.
The following phenomena are not
malfunctions.
•
The camera heats up when it is used for a
long time.
•
The battery heats up during charging.
•
When playing back a video fi le, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
•
To solve the problem, fi rst follow the
instructions below.
•
If the problem is not solved, reset the
camera. (੬ below)
•
If the problem persists, please consult your
nearest JVC dealer.
To reset the camera
1) Close the LCD monitor to turn off the
camera and remove the power supply
(battery pack or AC adapter) from the
camera, then reattach it.
2) Select [FACTORY PRESET] from the
MENU.
Trouble Action
੬
Power
No power is supplied.
•
Connect the AC adapter securely.
•
Detach the battery pack once again and reattach it fi rmly.
•
Replace the dead battery with a fully charged one.
14
14
–
The power does not
turn on, or the battery
operation time is
extremely short even
after the battery is fully
charged.
•
Make sure to use the camera under appropriate operating
temperatures.
•
The battery is worn out and needs to be replaced. Please
purchase a new one.
36
–
The access/charge
lamp on the camera
does not light during
charging.
•
Charging may stop in places subject to extremely high/low
temperatures to protect the battery. It is recommended
to charge it in places with a temperature of 10°C to 35°C
(50°F to 95°F).
•
When the battery is already fully charged, the lamp does
not light. Check the remaining battery power.
–
15
Recording
Recording cannot be
performed.
•
Recording medium is full. Delete unnecessary fi les or
replace the microSD card.
•
Select the recording medium properly.
20
–
During recording, the
date/time does not
appear.
•
Touch the DISP button once. 13
During video recording,
the 7REC indicator
fl ashes.
•
The temperature of the camera is increasing. If the
camera continues to heat up, recording may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
–
Digital zoom does not
work.
•
Change the settings in [ZOOM].
•
Digital zoom is not available in the still image recording
mode.
–
–
Troubleshooting

   Find Your Products By Category