Elo TouchSystems Car Video System Touchmonitor User Manual

0

Out of 0 Ratings

Owner's of the Elo TouchSystems Car Video System Touchmonitor gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 36
 
2-15
Installing the Serial Touch Driver for Windows 3.1 and MS-DOS
You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to
continue using your mouse along with your touchmonitor in DOS.
To install Windows 3.x and MS-DOS from Windows 98/95, follow the directions below:
1 Insert the CD-ROM in your computer’s CD-ROM drive.
2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your
CD-ROM drive may be mapped to a different drive letter).
3 Type install and press Enter to start the installation.
4 Align the touchscreen.
You must have already completed Steps 1 and 2 before proceeding.
To run the INSTALL program:
1 Type INSTALL at the DOS prompt in the directory containing the driver install files.
2 INSTALL asks you to select the software to install. Then choose d:\EloDos_W31 from the
displayed list.
3 INSTALL also asks you for the paths to use during installation, or you may use its defaults.
INSTALL creates directories as necessary, and warns you if they exist.
If you are updating your software, you may wish to specify the paths containing the earlier
versions, and overwrite the obsolete files. All executable programs are upward compatible. For
a list of differences from each previous version of the drivers, be sure to select “Differences
from Previous Versions” during the installation process.
INSTALL updates your AUTOEXEC.BAT file with the drivers you select. INSTALL makes a
copy of your original AUTOEXEC.BAT file, called AUTOEXEC.OLD. If you already have
ELO driver commands in your AUTOEXEC.BAT file, they will be commented out.
When INSTALL is finished, it leaves a file called GO.BAT in the subdirectory you specified.
GO loads the touchscreen driver, runs the calibration program ELOCALIB, and gives you some
final instructions.
If you are using Windows 3.1, you will also calibrate the touchscreen within Windows 3.1 with
the Touchscreen Control Panel.

   Find Your Products By Category