Bushnell GPS Receiver Onix User Manual

0

Out of 0 Ratings

Owner's of the Bushnell GPS Receiver Onix gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 32
 
20
Let’s take a look at the basics of setting up and using your Map Areas...
How to Define a New Map Area (Using “Fence Posts”):
• Click the HOT button to get the HOT menu, then press “+” to switch
to the “My Stuff” menu.
• Highlight “My Map Areas” and press OK-you will see “Create New
Map Area”, already selected. Press OK.
• A default name for the new Map Area is assigned (MPA001), and
you’ll see 3 options: Add Fence Post, Edit Name, and Delete. You can
edit the name of the Map Area now, or change it later. Select “Add
Fence Post” and press OK. The default name for your first Fence Post is
“FP001”, this can be changed later if you like.
• Use the 4-way keypad to move the Fence Post if you need to ne
tune its location (zoom in first with the “+” key if necessary.
• Once you have the rst Fence Post where you want it, press OK to
confirm and set it. Its name will then be displayed under the Map Area
heading (MPA001). Press OK or the RIGHT key to see these options
(Fig. 35)
:
Insert After-press OK to place the next Fence Post where the first
is (you can then move it elsewhere with the 4-way keypad), or press
the RIGHT key to see options for placing the next Fence Post based
on a waypoint, POI, your current location, etc.
Move-change the position of this Fence Post
Edit Name-change the name for this Fence Post
Set as Post #1-after selecting a previously placed Fence Post, select
this option and press OK to use the same Fence Post as the starting
point of a new (adjacent) Map Area.
Delete-erase the Fence Post
• Keep using “Insert After” to add Fence Posts until you have placed
at least three or four to define the boundaries of the Map Area you
are creating. Press EXIT or the LEFT key to see the Map Areas List, with
your new Map Area added. With the name of the Map Area selected,
press the RIGHT key to view the Area on the base map, with lines
visible between the Fence Posts. The Info Box at the bottom of the
display will automatically show the total area (in square miles) of
the Map Area. If your Map Area is very small, the Info Box changes to
square feet instead of miles. If you need to know the area in acres, 1
sq. mi.=640 acres, so simply multiply the number in the info box by
640. For small areas, divide the square feet by 43560 to see the total
area in acres.
• Press EXIT to return to the Map Areas list. Press OK to see the list of
USING YOUR ONIX400 GPS RECEIVER : Creating a Map Area
Fig 36. Map Area
Options List
Fig 35. Map Area
Fence Post Options
Fig 34. Completed
Map Area-built with 4
fence posts
Sq. Miles

   Find Your Products By Category