Bushnell Binoculars Bushnell Binoculars User Manual

0

Out of 0 Ratings

Owner's of the Bushnell Binoculars Bushnell Binoculars gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 114
 
7
TAKING STILL PHOTOS
After completing the basic setup as described in the previous pages, you are ready to take a photo. To turn on
the camera, press the POWER/MODE button until the Bushnell logo screen appears. The “live preview” display
shows the battery condition, number of photos remaining on the SD card, and the current setting of various
options, along with the image from the camera lens located between the binocular objective lenses. Please
refer to “LCD Preview Display Icon Guide” for more details. Press the left arrow key (DSP) to turn o the display
icons (to see only your photo subject). Press again to view the icons again. You may compose your photo while
looking through the binocular. However, for the most accurate framing, checking the LCD preview display is
recommended.
The ImageView will default to high resolution and quality settings, as well as “everything on automatic” when
it is turned on for the rst time, so you’re ready to take photos under normal conditions with no need to
change anything. If you’d like to explore the various available options, see the manual section titled “Using
the Main Menu-Options and Settings” for directions regarding how to select and change settings such as
resolution, image quality and exposure.
Hold the camera steady with both hands and press the OK/SNAP button (E) to take a still photo. The binocular
focus knob (F) does not aect the focus of the camera lens, which is preset to deliver sharp photos at all
distances from “innity” to about 50 ft. Attach the supplied mini tripod to the socket (G) to help avoid the
eects of camera shake. The included remote shutter cable can be inserted into the remote jack (H) to reduce
vibration, instead of using the OK/SNAP button.

   Find Your Products By Category