AT&T Cordless Telephone CL81201 User Manual

0

Out of 0 Ratings

Owner's of the AT&T Cordless Telephone CL81201 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 33
 
Adding and registering handsets
Before using a new CL80101 handset, you must register it with the AT&T
CL81101/CL81201/CL81301/CL82101/CL82201/CL82301/CL82351/
CL82401/CL82451/CL82501/CL82551/CL82601 telephone system
(purchased separately). The telephone system can support up to 12
handsets.
The handsets provided with your telephone system are already
registered as HANDSET 1 and so forth. Additional handsets
registered to the telephone system are assigned in sequential
order they are registered (up to HANDSET 12).
You must register each handset separately. When first purchased, all
expansion handsets show Put HS on BASE to register.
Register a handset to your telephone base
1. Make sure the handset is out of the telephone
base or charger and shows Put HS on BASE to
register before you begin registration.
2. Put the handset you wish to register on the
telephone base cradle.
3. The screen shows Registering... Please wait
and the IN USE light turns on. It takes up to 90
seconds to complete registration. Then
HANDSET X Registered appears on the screen,
with HANDSET being the handset name and X
being the handset number (1-12). The handset
beeps and the IN USE light turns off. The handset
is now registered with the telephone base.
If registration fails, Registration failed appears on the
screen. Start again from Step 1 above.
NOTES:
You cannot register a handset if any other system handset is in use.
To reset the telephone, unplug the power and the battery for a few seconds then
plug them back in.
•
•
Registration and deregistration
8
Put HS on BASE
to register
Registering...
Please wait
HANDSET X
Registered

   Find Your Products By Category