APC Indoor Furnishings Netshelter Sx Ar3814 Enclosure Rack Cabinet User Manual

0

Out of 0 Ratings

Owner's of the APC Indoor Furnishings Netshelter Sx Ar3814 Enclosure Rack Cabinet gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 32
 
NetShelter 24 U AV Enclosure Installation Manual2
Unpacking the Enclosure
Disclaimer
American Power Conversion is not responsible for damage sustained during reshipment of this product.
Receiving inspection
Inspect the package and contents for shipping damage, and make sure that all parts were sent. Report any
damage immediately to the shipping agent. Report missing contents, damage, or other problems
immediately to APC or your APC reseller.
Please Recycle
The shipping materials are recyclable. Save them for later use, or dispose of them
appropriately.
Procedure
1. Move the shipping pallet to a firm, level surface in an open area. Inspect for visible signs of
shipping damage. If you detect shipping damage, contact APC Customer Support using the
contact information on the back cover of this manual.
2. See the label on the packaging to determine where to cut the wrapping. Using sturdy shears or a
utility knife, carefully remove the plastic stretch wrap surrounding the enclosure.
3. Remove the four cardboard corner protectors.
4. Remove and retain the two pallet-mounting brackets with mounting hardware that anchor the
enclosure to the shipping pallet. Use a 13-mm wrench (not provided).
Note: Save the pallet-mounting brackets if you plan to bolt the enclosure to the floor.
5. With one person on each side of the enclosure, carefully roll it toward the rear of the pallet until
the rear casters clear the back edge of the pallet. Continue to slide the enclosure until the rear
casters touch the floor.
6. While one person carefully tips the enclosure slightly away from the pallet, have the other person
pull the pallet away from the enclosure. Set the enclosure gently on its casters.
Warning: Use caution when moving an empty enclosure on its casters; the enclosure
may be unstable when pushed or pulled from the side. Push the enclosure from the
front or back when moving it on its casters. For extra stability, load 158 kg (350 lbs)
of equipment into the bottom of the enclosure before moving it on its casters.

   Find Your Products By Category