0

Out of 0 Ratings

Owner's of the APC Air Conditioner AP7003 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 28
 
9
Installing the Exhaust Kit
Installing into
ceiling plenum
For this installation you will need the following:
The ceiling adapter
The holder flange
The exhaust duct
The base flange
Note: There should be about 12 to 15 inches of open space
above the ceiling adapter opening so that exhaust air is
not blocked
1. The exhaust duct is 8.5 feet long. Insert about 6 inches of
one end of the exhaust duct into the round hole in the ceil-
ing adapter.
2. Extend the 6 inches of the exhaust duct you have just
inserted and screw the holder flange as far as it will go onto
the exhaust duct.
3. Slide the ceiling tile out of the way about 10 to 12 inches.
4. Put the ceiling adapter into the ceiling tile grid.
Continued on next page