3Com Switch SuperStack II User Manual

0

Out of 0 Ratings

Owner's of the 3Com Switch SuperStack II gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 64
 
Important Safety Information 35
■ France and Peru only:
This unit cannot be powered from IT
†
supplies. If your supplies are of
IT type, this unit must be powered by 230V (2P+T) via an isolation
transformer ratio 1:1, with the secondary connection point labelled
Neutral, connected directly to earth (ground).
†
Impédance à la terre.
■ U.K. only:
The Switch 3300 FX is covered by Oftel General Approval,
NS/G/12345/J/100003, for indirect connection to a public
telecommunications system. This can only be achieved using the
console port on the unit and an approved modem.
■ Sockets for Redundant Power System (RPS):
Only connect an
Advanced Redundant Power System (3C16071)
with
Type 2 Power Modules and Type 2 cables to the
Redundant Power
System
socket.
WARNING: RJ45 Ports.
These are shielded RJ45 data sockets. They
cannot be used as telephone sockets. Only connect RJ45 data connectors
to these sockets.
Either shielded or unshielded data cables with shielded or unshielded
jacks can be connected to these data sockets.
WARNING: Fiber Optic ports – Optical Safety
Never look at the transmit LED through a magnifying device while it is
powered on. Never look directly at the fiber TX port and fiber cable ends
when they are powered on.
16982ug1.bk Page 35 Thursday, April 29, 1999 4:51 PM

   Find Your Products By Category