Sony Microphone ELECTRET CONDENSER User Manual

0

Out of 0 Ratings

Owner's of the Sony Microphone ELECTRET CONDENSER gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 2
 
Electret Condenser
Microphone
ECM-PC60
©2011 Sony Corporation
Printed in China
English
Electret Condenser
Microphone
WARNING
To reduce the risk of fire or electric
shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of electrical
shock, do not open the cabinet.
Refer servicing to qualified
personnel only.
You are cautioned that any changes or
modifications not expressly approved
in this manual could void your
authority to operate this equipment.
Features
High-quality metal body and a
compact, stylish, easy-to-carry
design
The supplied holding clip allows you
to use the microphone at meetings,
etc., without it getting in the way.
Acoustic characteristics suitable for
voice and chat services
Identifying the
parts (see fig. )
Microphone
Microphone holder
Post
Base
Three-conductor gold-plated mini
plug
Sounds are output in monaural.
Cord guide
How to use
With the stand
(see fig. )
1 Connect the plug to the
microphone jack of a plug-in-
power system recording device.
2 Clip the microphone in the
microphone holder, aligning
the groove () and ridge ().
3 Insert the cord into the cord
guide.
4 Adjust the post degree.
When carrying the microphone
(see fig. )
Remove the microphone from the
microphone holder, and fold the post
against the base.
With the holding clip
(see fig. )
Clip the microphone in the
microphone holder of the clip, aligning
the groove () and ridge ().
Troubleshooting
No sound, unable to record
The connected recorder is not a
plug-in-power supply system device.
Connect the microphone to a
plug-in-power supply system
device.
Check with the operating
instructions of the connected
device.
The connected recorder is a
monaural device.
Use a PC-236MS stereo-monaural
converter plug (sold separately).
No sound, noisy sound
The plug does not fit properly.
Wipe the plug with a soft cloth.
Insert the plug all the way into the
microphone jack, and make sure it
is secure.
Specifications
Type: Electret condenser
microphone
Plug:
Three-conductor gold-
plated mini plug (monaural)
Power supply:
Plug-in-power supply
system
Directivity:
Omni-directional
Front sensitivity (Open circuit
output voltage level):
–38.0 dB ±3.5 dB
(1,000 Hz, 0 dB = 1 V/Pa)
Frequency response:
50 Hz - 15,000 Hz
Cord length:
Approx. 1.2 m (47 1/4 in)
Dimensions (including projecting
parts):
Microphone: Approx.
ø8 mm × 19 mm (11/32 in ×
3/4 in) (diameter/length)
With stand: Approx.
ø50 mm × 100 mm (2 in ×
4 in) (diameter of the base/
height)
Mass: Microphone: Approx. 12 g
(0.42 oz) (Incl. cord)
With stand: Approx. 40 g
(1.4 oz)
Operating temperature:
5 °C to 35 °C
(41 °F to 95 °F)
Supplied accessories:
Stand (1), Extension cord
(Approx. 1.0 m (39 3/8 in)
long) (1), Holding clip (1)
Optional accessory:
PC-236MS stereo-monaural
converter plug
If the microphone is
connected to a monaural
recorder, the microphone
may not be able to work to
its full capability, depending
on the recorder. In such a
case, use the PC-236MS
stereo-monaural converter
plug.
Design and specifications are subject
to change without notice.
4-273-325-11(1)
MIC
(PLUG IN POWER)
1
2
3
4
Precautions
The supplied extension cord can be
used with this microphone only, and
cannot be used with any other
devices (stereo microphone, etc.).
This microphone is a precision
instrument. Never disassemble it.
Do not expose the microphone to a
mechanical shock such as by
dropping or striking it.
If the microphone is placed near
speakers/headphones, a high pitched
noise may be heard (howling effect).
This is caused by the microphone
catching sound from the speakers/
headphones repeatedly. In this case,
place the microphone as far as
possible from the speakers/
headphones.
Do not leave the microphone in a
humid, dusty or hot place, or under
direct sunlight. This may cause a
malfunction.
When using outdoors, never let the
microphone become wet with rain
or saltwater.
When the microphone and the plug
become dirty, wipe them with a dry
cloth. Do not blow on the
microphone when dusting it. A dirty
plug will cause deterioration of
sound quality and intermitted
sound.
Always hold the plug when
disconnecting. Pulling the cord may
cause it to snap.
Operating Instructions
Mode d’emploi
Manual de instrucciones

   Find Your Products By Category