0

Out of 0 Ratings

Owner's of the COBY electronic TV Mount TFTV3229 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 25
 
3
Unit View
Wall Mounting - Attach the TV case to the wall
This unit can be deliveried to a final user either as a wholly assembled product or with the TV case
detached from the unit base, depending on different packing methords. When you get the unit as a fully
assembled product, you need to remove the unit stand rst before wall mounting, To detach the unit
base, release the xing screws.
Use the VESA standard mountings to fix the TV case on the wall. Take care when mounting, it may
cause damage or serious injury should it fall from its mountings. See the Specication page for VESA
informaiton. A variety of mounts are available in your local retailer, see instructions when installing the
unit. An adequate space is necessary for this installation. Screws used for mounting purposes shall not
exceed 10mm in length.
Unit View
Remote Control Senser
Sense the remote control
signal.
TFT
Screen
Power Indicator
Lights bright blue when TV is on,
it will dim when TV is turned off
(Standby mode).
VOLUME +/-
Adjust the sound
output level.
CHANNEL +/-
Skip channels.
MENU
Display the system
setup menu.
SOURCE
Select a desired
working mode.
Screw X3
These screws are
connecting the TV
case to the unit stand.
POWER
Turn the unit on/
off(standby).
Unit Stand
“SERVICE ONLY” is for the engineering use merely and
not supposed to be utilized by a finial user.
For more specific details on connector pannels, please
read the Cable Connection section
Mounting
Thread x 4.
NOTE: The unit enters into the standby
mode after being turned off with the
POWER button, and it still consumes
power in the standby mode.
Unplug the power cord from the outlet
completely when it will not be used for a
long period of time.