0

Out of 0 Ratings

Owner's of the Axis Communications Home Security System Axis Communications Home Security System gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 60
 
AXIS P5544 PTZ Dome Network Camera
Hardware Overview
Hardware Overview
1
2
4
5
7
6 8
3
1
Part number (P/N) & Serial number (S/N)
2
Network connector (PoE+)
3
Panopsis lens
4
Multi-connector
5
Control button
6
SD card slot
7
Status LED indicator
8
Restart button
Connectors
For technical specications, see page 57.
Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.
NOTICE
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network
cable (STP) may be appropriate or required. Any network cab les that are routed in outdoor enviro nments or similar shall be
shielded (STP) and intended fo
rtheirspecic use. Make sure that the midspan is properly grounded . See Electromagnetic
Compatibility (EMC) for regulatory requirements.
SD card slot - A standard or high-capacity SD card (not includ ed) can be used for local recording with removable storage.
NOTICE
To prevent corruption of recordings, the S D card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card an d click Unmount.
Control b
utton - The control button is used for:
ConnectingtoanAXISVideoHostingSystemservice.Seepage 42. To connect, press and hold the button for about
1 second until the Status LED ashes green.
5