0

Out of 0 Ratings

Owner's of the Avanti Ice Maker PIM25SS gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 22
 
12
PROBLEMS WITH YOUR ICE MAKER?
You can solve many common ice maker problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
Problem
Possible Cause
Suggested Solutions
The compressor works
abnormally with a buzzing
Noise.
The voltage is lower than
recommended.
Stop the ice maker and do not restart
until the voltage is normal.
Water shortage indicator
Light is on.
There is not enough water in
the reservoir.
Press the stop button, fill with water,
wait 3 minutes and press the start
button to restart.
Ice full indicator light is on.
Ice storage cabinet is full to the
top.
Remove some of the ice.
Indicator lights are off.
Blown fuse/ no power/blown
breaker
Replace fuse / turn power on.
The ice made is too large
and with pieces sticking
together.
The water temperature in the
storage tray or ambient is too
low.
Stop the machine and reset the ice
making cycle. Restart the machine
after turning it off.
Conditions for ice making
cycle are right but no ice is
made.
Refrigerant leaks/ sealed
system is blocked.
Replace unit.
Both alert and ice full
indicators are on.
The water tray does not turn.
Check for blocked ice cubes.